[Logo] Argo Navis Users' Group
  [Search] Search   [Recent Topics] Recent Topics   [Hottest Topics] Hottest Topics   [Top Downloads] Top Downloads   [Groups] Back to home page 
[Register] Register /  [Login] Login 
Argo Navis Firmware Version 3.0.3 now available for download RSS feed
Forum Index » User Forum
Author Message
wildcard

[Avatar]

Joined: 17/10/2019
Messages: 122
Location: Mount Kuring-Gai NSW Australia
Offline
PLEASE NOTE THIS FIRMWARE RELEASE HAS BEEN WITHDRAWN PENDING A BUG FIX.

Wildcard Innovations is pleased to announce Argo Navis Firmware Version 3.0.3.

To show our appreciation of your support, Wildcard are providing a free license (subject to your acceptance of our End User Licence Agreement) to Version 3.0.3 to you as a gift.

Version 3.0.3 is now available for download -
http://www.wildcard-innovations.com.au/firmware_download.html

The End User Licence Agreement can be found here -
http://www.wildcard-innovations.com.au/EULA.html

To download the firmware, you will need to have registered and have a copy of your Registration Code.
If you registered in the past, you will receive a reminder of your registration code by email in due course.

If you have not registered before, you will find the registration link on this page :-
http://www.wildcard-innovations.com.au/firmware_download.html

We highly recommend that you also download the following -

* Argo Navis User Manual Edition 11.
See http://www.wildcard-innovations.com.au/documentation.html
This edition of the User Manual includes a description of how to install and use the latest Argonaut Version 2.0 software utility for Windows (page 160).

* Argonaut Version 2.0 software utility for Windows.
See https://www.wildcard-innovations.com.au/utilities.html
A similar utility for Linux are available from the same URL.

To perform the firmware download to your unit, you will require the following additional components -

* Argonaut for Windows or sgzload for Linux.
These can be downloaded from here -
https://www.wildcard-innovations.com.au/utilities.html

* A serial cable for connection to your Argo Navis from your PC, Wildcard Innovations part number pn-ser-cbl.
If you do not have a serial cable and would like to purchase one, we can supply it for AUD17.27 (approx. USD11.74) plus an additional low cost Airmail shipping rate that differs according to your region).

(Residents in Australia only, cable + GST = AUD19.00)

If your computer does not have an RS-232 serial port, we recommend you use the serial cable in conjunction with the Keyspan USA-19HS USB Serial Adapter.
Wildcard Innovations also stock these as their part number pn-usb and can supply it for AUD64.00 (approx. USD43.90) plus an additional low cost Airmail shipping rate that differs according to your region.

(Residents in Australia only, USB Serial Adapter + GST = AUD70.40)

To purchase either or both of the above you can pay securely online using MasterCard, Visa or AMEX using this URL -
https://www.wildcard-innovations.com.au/purchase.html

Start by selecting your country in the pulldown menu. Australian residents will also be prompted to enter a Postcode.

The cable options appear beneath the heading "Communication and Power Cable options".

If you require a serial cable, enter a Qty of 1 in the pn-ser-cbl row.

If you require a USB Serial Adapter, enter a Qty of 1 in the pn-usb row.

Enter your name, email address, phone number, shipping address.

Then press Pay Now. This will then connect you to a secure server at the Commonwealth Bank of Australia where you can enter your credit card details.

To install Argonaut Version 2.0, refer to the step-by-step instructions starting on page 161.

To determine which version of firmware your unit currently has loaded, dial up MODE STATUS, STATUS VERSION.

We recommend you use Argonaut Version 2.0 to save your existing Argo Navis setups onto your PC. See page 182 on "Transferring setups".

If you are migrating from firmware version 3.0.0 or later, Argo Navis firmware Version 3.0.3 will preserve your setups.

However, if you are migrating from an earlier version than 3.0.0, then version 3.0.3 will restore your setups to factory defaults so we highly recommend you use Argonaut to save the setups so you can restore them later.

Please note that loading Argo Navis firmware version 3.0.3 will clear any existing asteroid, comet, satellite or user catalogs you already have loaded.
You should ensure you have the original data for any catalogs you may have loaded stored on your PC so that you can reload it after performing the upgrade.

To download a firmware file from your PC to Argo Navis, please refer to page 187.

Version 3.0.3 contains the following improvements :-

* Improved solution for some comet and asteroid orbits.
* More reliable first-time power-up when real-time clock coin cell battery becomes depleted or is replaced.


Should you experience any difficulties, simply email sales@wildcard-innovations.com.au for assistance.

We thank you again for your support and we hope you enjoy Version 3.0.3.

Best Regards

Gary Kopff
Managing Director
Wildcard Innovations Pty. Ltd.
20 Kilmory Place, Mount Kuring-Gai
NSW. 2080. Australia
Phone +61-2-9457-9049
wildcard@wildcard-innovations.com.au
http://www.wildcard-innovations.com.au

Gary Kopff
Managing Director
Wildcard Innovations Pty. Ltd.
20 Kilmory Place
Mount Kuring-Gai NSW 2080
Australia
Phone +61-2-9457-9049
wildcard@wildcard-innovations.com.au
https://www.wildcard-innovations.com.au
[Email] [WWW]
astroal


Joined: 17/10/2019
Messages: 4
Offline
Have downloaded the Argonaut version 2 as well as the user manual. However, after reading the procedure in the manual to upgrade the Firmware, I am hesitant to monkey around with the unit that is giving me satisfactory performance. It seems to me that the advantages of the new firmware do not outweigh the hoops to jump through to reset Setups, Locations, user catalogues, etc. I am a person who does not dream in binary codes, so this is a bit of foreign territory to me.
Al
Seldom


Joined: 19/10/2019
Messages: 1
Offline
I'm not having any luck installing 3.0.3 firmware. Firmware update seemed to be working fine through load to 100%, but I'm getting an "Encountered Bug" message about 2 seconds after power up.

Have emailed Gary.
wildcard

[Avatar]

Joined: 17/10/2019
Messages: 122
Location: Mount Kuring-Gai NSW Australia
Offline
astroal wrote:Have downloaded the Argonaut version 2 as well as the user manual. However, after reading the procedure in the manual to upgrade the Firmware, I am hesitant to monkey around with the unit that is giving me satisfactory performance. It seems to me that the advantages of the new firmware do not outweigh the hoops to jump through to reset Setups, Locations, user catalogues, etc. I am a person who does not dream in binary codes, so this is a bit of foreign territory to me.
Al


Hi Al,

Thanks for the post and welcome to the Group.

Coming from version 3.0.1 or 3.0.2, the latest firmware is primarily about a fix to the computation of the orbits for some asteroids and comets. Not all, just some.

If coming from a version prior to 3.0.0, the enhancements are significant.

I can relate to the penchant of "if it ain't broken, don't fix it".

But in providing version 3.0.3 we hope to have provided user's with a choice of whether they upgrade or not either now or at any point in the future.
Plus we are here to assist if need be.

Wishing you all the best for the New Year!

Gary Kopff
Managing Director
Wildcard Innovations Pty. Ltd.
20 Kilmory Place
Mount Kuring-Gai NSW 2080
Australia
Phone +61-2-9457-9049
wildcard@wildcard-innovations.com.au
https://www.wildcard-innovations.com.au
[Email] [WWW]
wildcard

[Avatar]

Joined: 17/10/2019
Messages: 122
Location: Mount Kuring-Gai NSW Australia
Offline
Seldom wrote:I'm not having any luck installing 3.0.3 firmware. Firmware update seemed to be working fine through load to 100%, but I'm getting an "Encountered Bug" message about 2 seconds after power up.

Have emailed Gary.


Hi Seldom,

We have received several reports of a successful upgrade including during beta test and now and three thus far of a problem similar to yours.

I have emailed you directly with he hope we can narrow it down.

Gary Kopff
Managing Director
Wildcard Innovations Pty. Ltd.
20 Kilmory Place
Mount Kuring-Gai NSW 2080
Australia
Phone +61-2-9457-9049
wildcard@wildcard-innovations.com.au
https://www.wildcard-innovations.com.au
[Email] [WWW]
wildcard

[Avatar]

Joined: 17/10/2019
Messages: 122
Location: Mount Kuring-Gai NSW Australia
Offline
With apologies we have withdrawn Version 3.0.3 and will replace it with Version 3.0.4 shortly.

If you have already downloaded Version 3.0.3. we recommend you do not download it into your unit.

If you have already downloaded, we recommend you "roll-back" to version 3.0.2 which is on the web site.

With Version 3.0.3 we had made significant changes as well as to how the positions of planets are computed.
Like all solar system objects, their positions are a function of time.

As it transpires, there appears to be a bug which is a function of time in Version 3.0.3 that only happened for the first time today.
That bug will result in an ENCOUNTERED BUG error .

The firmware had been previously tested over the past couple of weeks so it is both unfortunate and fortunate that it was uncovered today.

We apologize for the inconvenience.

Gary Kopff
Managing Director
Wildcard Innovations Pty. Ltd.
20 Kilmory Place
Mount Kuring-Gai NSW 2080
Australia
Phone +61-2-9457-9049
wildcard@wildcard-innovations.com.au
https://www.wildcard-innovations.com.au
[Email] [WWW]
 
Forum Index » User Forum
Go to:   
Mobile view
Powered by JForum 2.6.2 © 2019 JForum Team • Maintained by Andowson Chang and Ulf Dittmer